Call For A Free On-Site Consultation!
Serving Central Texas

Seal Coating Protects Your Investment While Enhancing The Appearance Of Your Property

Seal Coating Protects Your Investment While Enhancing The Appearance Of Your Property

  • Pave Shield  Seal Coat Emulsion by Neyra Industries is a tough, durable, environmentally friendly coating Low VOC, non-flammable coating emitting no obnoxious odors or fumes. Independent tests confirm Pave Shield out-performs both conventional coal tar and asphalt based coatings.
  • Pave Shield is chemically reinforced with Duraflex, enhancing the adhesion to the asphalt pavement, rejuvenating the surface and preventing raveling increasing the effectiveness of the sealer.
  •  Integrity’s products and methodologies are chosen to provide value and long term results. PaveShield seal coating and MaXum hardener are industry leaders in performance and value.
  • Why Integrity  made the decision to add MaXum additive to the Paveshield sealer:
    • Reduces drying time by more than 50%. Fast dry technology helps you be ready for traffic sooner
    • Speeds up curing time, even in the shade.
    • Polymer fortifier ensures greatest durability
    • Improves bonding and sand suspension to ensure an even-textured, skid-resistant, durable surface
    • Tough coating to minimize scuffing and power steering marks.
    • Enhanced chemical resistance to gasoline, oils and salts.
    • Superior sand suspension provides a beautiful, darker more uniform surface.
  • Your parking lot’s greatest enemy is not just the punishment from daily traffic. Heat, sunlight and moisture all negatively affect your parking lot surface.
  • Seal Coat protects your asphalt by sealing small cracks less than an 1/8”  to prevent water penetration
  • Seal Coat aids in slowing pavement oxidation of the sun by blocking damaging effects of ultraviolet rays.
  • Seal Coat prevents oil and gas from seeping into the asphalt and causing further damage to your investment.
    • This is especially important on driveways where cars are parked or worked on. Oil and gasoline soften asphalt. PaveShield sealer contains additives that resist chemicals. By filling surface voids, sealcoating also reduces the depth to which oil or gas can penetrate the pavement.
  • Seal coat is an inexpensive product that enhances the curb appeal of your property. A rich dark parking lot helps your property stand out from other businesses with have faded lots and marks your company as the one that takes pride in its property.
  • Cracks in the pavement enable water to penetrate the pavement, often into the sub base, weakening and reducing the pavement's strength. Sealcoating protects the surface and fills surface voids, reducing pavement's exposure to oxygen and water and extending pavement life.
  • Ultraviolet rays cause pavement to deteriorate and crumble. Regularly applied sealcoat helps to prevent ultraviolet rays from penetrating the pavement
  • Sealcoating with PaveShield brings back the dark color of the pavement, making it look and wear like new.
  • Seal coated pavement is also easier to clean and maintain. Because sealcoat fills surface voids, a seal coated surface is much smoother. And a smoother surface is easier to sweep, wash and maintain
  • Integrity Asphalt and Sealcoating Process:
    • Install cones and barricades to protect the tenants and residents vehicles.
    • Broom clean and high pressure blow lot so sealer sticks to pavement, not dirt.
    • Treat oil spots with an oil primer so sealer adheres properly
    • Hand squeegee all edges to provide clean edges and extra sealer.
    • Apply a light first coat is applied to fill voids and act as a primer
    • Allow first coat to partially dry so moisture is not trapped between the coats
    • Apply second, thicker coat which bonds to the first to create a solid 1/8” coating
    • Walk the area to ensure work meets our standards of quality
    • Return the next morning to remove cones and barricades                                    
This entry was posted in Blog. Bookmark the permalink.

Leave a reply