skip to Main Content
Call 512-853-9009 for a FREE on-site consultation

Asphalt Seal Coating in Belton, TX

Are you starting to notice your asphalt parking lot looking faded and cracked? Don’t wait until the problem worsens to the point that you must replace the pavement—invest in asphalt seal coating instead. This cost-effective option keeps your roads looking new and attractive for years to come.

Integrity Paving & Coatings is the right company for the job! We have years of experience helping Belton business owners revitalize their parking lots and paved entrances.

To request a quote for asphalt seal coating in Belton, simply fill out our online contact form today.

How Seal Coating Works

Seal coating is the process of adding a protective layer to an asphalt road. Much like applying sunscreen protects your skin, and donning a raincoat prevents your clothes from getting wet, seal coating protects your pavement from the elements.

Over the years, Integrity Paving & Coatings has mastered a tried-and-true method for applying seal coat. First, we brush and blow debris off the road and parking lot and treat any oil spots. Then, we apply a thin primer, followed by a 1/8”-thick layer of asphalt emulsion, creating an impenetrable barrier that repels sunlight and water. We start every job by applying extra sealer to the perimeter with a hand squeegee to form a clean, finished edge.

Benefits of Asphalt Seal Coating

The seal coating process was introduced to protect and prolong the life of asphalt pavement. Be sure to include seal coating in your asphalt maintenance program if you want to enjoy these benefits:

  • Prevent UV exposure that can cause road weakening and crumbling
  • Keep potholes at bay by preventing water from penetrating the surface
  • Resist stains from gasoline, oil, antifreeze, and other chemical spills
  • Decrease the rate of deterioration caused by heavy traffic
  • Avoid paying for costly asphalt repairs in the future
  • Improve your roadway’s aesthetics with a uniform, like-new appearance
  • Double the life span of your asphalt

Contact Integrity Paving & Coatings in Belton, Texas to learn how you can enjoy these benefits for yourself!

How Often to Seal Coat Your Pavement

Our expert team recommends seal coating six months to a year following new installation, and then every four to seven years after that. Rest assured that we make each job as convenient as possible for your staff, customers, visitors, and tenants. We excel in communications and logistics, so there is no need to worry about shutting down your parking lot any longer than necessary. Keep up with this cost-effective preventative measure, and your roadways should need no additional maintenance for at least the first five to ten years of their life span!

Is it time to seal coat your Belton, Texas parking lot? Contact us for a free on-site estimate.

Types of Seal Coating

There are two major seal coating types: environmentally friendly asphalt emulsion coatings and coal tar sealers. Asphalt emulsion sealers are less complicated and emit fewer volatile organic compounds (VOCs). Coal tar sealers are banned in many cities and counties. One of our team members can help you weigh the costs and benefits of both seal coat types.

Our special seal coat emulsion is superior to our competitors’ products because it features a rubberized hardener that boosts effectiveness, improves adhesion, and shortens the drying time. We also never water down our materials, a practice some companies use to save money, even though it decreases effectiveness and longevity.

Schedule Seal Coating in Belton, TX

Choose Integrity Paving & Coatings to enjoy a convenient seal coat application process and the highest quality results possible. We believe nothing but the best is good enough for our clients, so feel free to set your expectations high! We ensure an on-time, on-budget, top-quality job every time.

If you’re eager for your free asphalt seal coating quote in Belton, Texas, please contact us today.

Back To Top
Get a Free Quote