If you see a distinctive pattern of cracking in your asphalt that looks like the…
Whether you are looking to build a driveway, a parking lot or a racing circuit for recreational racing, asphalt has to be your first choice of material. Asphalt paving in Austin will be greatly beneficial for you because this material has so many qualities that no other material has been able to beat, even after several decades. It has sand, crushed rocks and many other aggregates in it, but a binder is required to keep all these aggregates together. Bitumen is the most commonly used binder with asphalt. There are different types of asphalt mixtures that you can choose from depending on your requirements.
If you are looking to get a driveway or parking lot job done, here is some useful information about asphalt paving in Austin to help you make the decision.
Asphalt vs. Concrete
Every time you search for different types of materials that you can select for your site’s construction, you have two options: asphalt and concrete. While both the materials are amazingly strong and long-lasting, the upfront and long-term cost of asphalt is going to be lower than that of concrete. In most cases, you will get asphalt paving in Austin done for nearly 30% less money than concrete paving. It is also the top material choice for many people because the project can be completed quickly. Within a couple of days, your asphalt paving is ready for foot and wheeled traffic.
In addition to being ready for use, it also takes less time to do the actual asphalt paving. It can take several weeks to complete a medium sized concrete paving project whereas it will take only a couple of days to complete the same project using asphalt. While the length of the project depends on how you maintain both the materials, the complaints of spalling are not that common with asphalt roads. Asphalt repair in Austin is also cheaper than concrete repair. Not to mention, you can do much of the repair work for asphalt yourself whereas doing the same with concrete is nearly impossible.
While looks don’t have a big enough value to beat the functionalities of these two materials, they can still be mentioned. Finished asphalt driveways and parking lots are darker in color. This is a great characteristic of asphalt because oil spills and tire marks are not that easily visible on its darker surface.
The Intrinsic Benefits of Asphalt Paving
You don’t necessarily have to compare asphalt paving with concrete paving to know its benefits. It has many of its benefits that are compelling enough for you to pick it as your material of choice. First, as a business owner looking for pavement, parking lot or driveway, you want to make the best impression while saving your money. Depending on the size of the project, asphalt paving in Austin can save you thousands of dollars by the time of completion. Furthermore, the ongoing costs of maintenance and repairs are also quite affordable for asphalt paving.
One of the things that make asphalt the best material for roads is that it is safe. You can’t reach the smoothness level of this material with any other material. The smoother the surface of the road is the more traction a vehicle will get. Not to mention, the smooth asphalt roads are also great when it comes to rolling resistance. You are saving money on fuel when driving on smooth asphalt roads.
As a taxpayer, you will love to know that asphalt is saving you money as well. Today, the world is vehemently talking about the recyclability of materials and their impact on the environment. Asphalt is great in this department as well. It is recyclable, and in fact, it beats any other material in the US when it comes to recyclability. Americans are saving nearly $1.8 billion every year due to the recycling of asphalt. Moreover, when it comes to construction, workers can build one lane at a time using this material. This ensures traffic is still running on the road while the construction is going on.
There are three different types of asphalt, and you can choose one based on your requirements.
Cold Mix Asphalt
This is a unique mix in which the aggregates that asphalt comprises of don’t undergo heating. There is a special bitumen emulsion that is put to use when constructing a road using this material. This special emulsion that comes from bitumen does it binding magic at the time of compaction process. This type of asphalt is highly recommended for roads that get a lot of traffic and closing the road for construction is not recommended.
Warm Mix Asphalt
This asphalt mix gets heated at up to 40-degree Celsius only. When workers are constructing roads with this material, it is easy for them to complete the job since the temperature of the mix is low. Once again, roads with a lot of traffic benefit from this material the most as the mix cool down faster, and the road is ready for traffic much quicker.
Hot Mix Asphalt
Producing this mix of asphalt required temperatures close to and higher than 150-degree Celsius. Roads, where there is not a lot of traffic, can be constructed using this mix. It is best that you talk to your paving company and take their suggestions on which type of asphalt will be best for your project.
Seal Coating for Asphalt Paving
One of the most important things you need to know before you go for asphalt paving from an asphalt paving company in Austin is seal coating. After an asphalt paving has been completed, a sealer is often layered over it to increase the life of paving. Keep in mind that high traffic, UV rays from the sun, rainfall, etc. are many of the factors that are constantly giving a beating to your asphalt paving. To add 5 to 10 more years of life to your paving, you need to go for seal coating. When you are looking a seal coating job, you need to know the different types of sealers available. Here are the available options for asphalt seal coating in Austin.
- Fast Dry Sealers
- Coal Tar Sealers
- Emulsion Sealers
Each sealer has its advantages and disadvantages. However, your main deciding factor when choosing the sealer should be the warranty you get with the sealer. You can easily get 3 to 5 years warranty on the sealer. If you can get more warranty, don’t hesitate to go for it.
Choose the Right Company
The last and yet the most important thing to do before getting your asphalt paving done is to hire the right asphalt paving company in Austin. There are many but only a reliable and experienced company with success rate should be chosen. You should consider contacting a company that has asphalt and concrete installation, maintenance and repair services available in one place. It will save you a lot of money to get all the solutions in one place. Of course, when it comes to concrete and asphalt paving in Austin, Integrity Paving and Coatings is your best bet.